![]() The device you’re connecting should have an ON / OFF switch. Once the software is installed, just start the program and follow the prompts. For this, you need to download the free Unifying Software from Logitech’s site. Manufacturers like Logitech, Microsoft, and others have introduced. Once you have a unifying receiver, the next step is to get it to recognize your existing mouse or keyboard. If there is no power, try plugging the mouse in with the cable provided. You just need to insert the dongle into your PC or laptop to establish the connection to start using the mouse seamlessly. Wireless Receiver Setup for Mouse Logitech Support Step 1 of 3 Turn your mouse over and switch it on Find the switch on the bottom of your mouse and switch it to the ON position. If this does not resolve the issue, see answer 44489 for information on how to contact Customer Care. Every wireless mouse or keyboard comes bundled with a tiny USB dongle that acts as the receiver for the wireless signals transmitted by the peripheral. ![]() receiver To check your accessorys charge level, click the Control Center. NOTE: If your gaming mouse doesn't function after following these steps, plug the USB receiver into another working USB port on your computer and repeat steps 4 – 8. The USB receiver is stored on the underside of the mouse How to change battery. Select Yes, and then click Next.Ĭlick Finish to exit the Logitech Connection Utility. When your gaming mouse is detected, you’ll see a confirmation message. NOTE: If the screen doesn’t change, turn the mouse off for at least five seconds, and then turn it back on again. The file name is “logitech_connect.exe.”Ĭlick Next at the bottom of the Welcome screen.įollow the on-screen instructions to turn your gaming mouse off and then back on. Hold the gesture button and move the mouse up, down, left or right to activate different actions such as Windows Task View or Mission Control on the Mac. Plug the receiver directly and securely into a working USB port on your computer.ĭisconnect other Logitech wireless receivers before proceeding. If the LED light on the mouse turns light blue, then you should replace your batteries.ĭownload and install the Logitech Connection Utility software from the G602 Downloads page. From here, right-click the HID-compliant mouse and select the Disable option. Click on the Mice and other pointing devices option in the Device Manager window to expand it. ![]() Type devmgmt.msc and click the Ok button. To check the battery status, press the G6 button on the side of your mouse. Run the Logitech Unifying software as an Administrator Press the Windows key + R to open the run window. This is an expensive piece of hardware (two, if you count my Microsoft keyboard) rendered nigh-on useless by malfunctioning software.Before reconnecting your gaming mouse, make sure that the batteries in your mouse are fresh. And occasionally, randomly, the modifier keys on my (otherwise unsupported by a driver) Microsoft keyboard swap their functions (I have them set to the proper Mac keyboard layout of Command on the right, Option on the left, using the OS X Keyboard prefpane), a problem which is often remedied by unplugging not the Microsoft receiver but the Logitech receiver. Doing this also causes my button configuration to be screwed up I have the thumb button on my Performance Mouse MX set up for Mission Control, and it stops working entirely after unplugging and replugging the Unifying Receiver. It works again, for an indeterminate amount of time, and will often fail again, especially if my Mac has just been started up. Logitech's solution, as per their forums, is to unplug the receiver and plug it back in again. Oddly enough, all the buttons still work though. On your mouse, press the Connect button the device should appear as an available Bluetooth device on your screen. You can also combine this step with the prior one resetting both the mouse and receiver together. You will need to wait for Windows to auto-detect it after. To do this on a Windows 10 PC, go to Settings > Devices > Add Bluetooth. Whether improperly seated or the USB port just needs to wake up, you can test unplugging the USB receiver and then plugging it back in again. Now, since the 10.11.2 update has come out, my mouse will often lose the ability to track, stopping the cursor dead in its tracks. If your Logitech wireless mouse supports Bluetooth, you can connect it via Bluetooth instead of a receiver. ![]() Everything had been working properly using v3.9.3 on El Capitan. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |